Stiffness Tester Machines,Torsion Stiffness Testing Machines,Impact Tester Machines

Customers


	FAQ's


	By Name		By Group

	By Principal		By Industry


	Customer Request Form




	Industrial Material Testing (Principal: Tinius Olsen)

	Q.	What is the range of the Universal testing Machines available?
	Q.	What are the application areas?
	Q.	What are the types of tests possible on these machines?
	Q.	What type of results are available?
	Q.	Can these machines perform tests as required by various International Standards?
	Q.	Can these machines be used for dynamic or fatigue testing?
	Q.	What other products are manufactured by Tinius Olsen for the metals industry?
	Q.	What products are available for plastic testing?

	Q.	What is the range of the Universal testing Machines available?

	A.	Screw Driven machines are available from 1 KN upto 300KN capacities. Load cells are available which will allow the user to test at less than 5 Newton. Standard Hydraulic Machines are available from 15KN up to 3000KN. Higher capacities are available on request

	Q.	What are the application areas?

	A.	These machines are used for physical testing for various materials like Metals, Plastics, Rubber, Textiles, Timber Adhesives, Films, Paper, Composites, Packaging, Components, Medical Devices and many more.

	Q.	What are the types of tests possible on these machines?

	A.	These machines can perform following tests. Tensile, Compression, Flexural, Shear, Peel, Tear, Seam slippage, Elastic Stretch, Puncture, Friction etc
		Top
	Q.	What type of results are available?

	A.	Typical tests results which can be obtained are as follows, E Modulus, Proof Stress, Yield Stress, Stress, Strain, Tensile strength, Elongation at break, Compressive strength, Flexural Strength, Energy absorbed, Peel Strength, Seam Strength, Elasticity, Tear Strength, Puncture/Burst Strength, coefficient of Friction and many more.

	Q.	Can these machines perform tests as required by various International Standards?

	A.	Yes, these machines can meet the testing requirements as specified by various standards like ASTM, EN, BIS, ISO, DIN, JIS, M&S etc.

	Q.	Can these machines be used for dynamic or fatigue testing?

	A.	No, These are static machines and cannot be used for fatigue testing applications. Only servo hydraulic machines are recommended for dynamic testing.

	Q.	What other products are manufactured by Tinius Olsen for the metals industry?

	A.	Following products are available for metals testing. Brinell Hard ness tester Torsion testing machines Drawability (r bar) tester Impact tester

	Q.	What products are available for plastic testing?

	A.	Following products are available for plastic testing. Melt Indexer Impact tester Automatic Deflection Temperature/Vicat tester Brittleness tester Stiffness tester Torsion stiffness tester Folding Endurance tester Specimen Notcher

		Top