Elcometer 510 Automatic Pull-Off Adhesion Gauge
The Elcometer 510 Automatic Pull-Off Adhesion Gauge accurately measures the adhesion strength of coatings on a wide range of substrates.measurement range (0-100MPa) with an accuracy of ±1% of full scale.
The Elcometer 510 Automatic Pull-Off Adhesion Gauge accurately measures the adhesion strength of coatings on a wide range of substrates. This is automatic Pull-off Adhesion Tester measures the adhesion strength of coating on a wide range of substrates. Automatic Hydraulic pump ensure smooth and continuous pressure application for consistent, repeatable adhesion strength results. Elecometer 510 tester is a portable, with No external powers sources and ideal for field uses. Conversion charts not required with tester automatically calculates pressure based on dolly size. Internal memory stores maximum pull-off pressure that is up to 200 pulls.
Features:
- Automatic adhesion tester with selectable pull rates for 10, 14.2, 20 & 50mm diameter dollies.
- View adhesion trend graphs or live statistics alongside the reading value.
- Individual user definable adhesion pull rate graphs can be saved with each reading.
- Coating Adhesion Test Pull-Off Adhesion Automatic Adhesion Testing
- Stores individual adhesion strength readings and pull rate graphs in up to 2,500 alpha numeric batches, together with date, time and attribute information.
- Either pull to maximum or pull to preset limit. Unique time hold feature allows users to set a delay before pressure returns to zero.
- Save cohesive and adhesive failure attributes alongside your concrete adhesion pull data in accordance with National and International Standards.
- Automatic Adhesion Tester – Mostly used in pull off test and dolly test
- ElcoMaster Software Adhesion for Mobile Devices
- Powered by either standard rechargeable batteries or AC mains*. Each battery charge performs up to 200 pulls. Battery recharge time less than 300 minutes.
- Transfer data to your PC via USB or Bluetooth® for further analysis with ElcoMaster® software or view live pull rate graphs in ElcoMaster® during the test.
- Using wireless Bluetooth® communication link the gauge to an Android™ or iPhoneÇ‚ mobile device. Live GPS coordinates from your mobile device can be added to reports and emailed instantly.
- A range of standard and thin substrate actuator skirts allow each gauge to be use with 10, 14.2, 20 or 50mm diameter reusable dollies, ideal for testing coatings on thick, thin, flat or convex substrates, also used for concrete and tile adhesion test.
- The optional magnetic anchor clamp ensures the actuator doesn't fall during tests on vertical surfaces or testing at height.
- Supplied in a robust plastic carry case for easy transportation to and around the job site.